Country Flame HR-01 Bedienerhandbuch PDF herunterladen (Seite 11)

11 - EN

Installer / Service Manual BURNiT Comfort PM/PM-B

3.4 Exhaust gas system requirements:

We recommend the Exhaust gas system to meet the following requirements:

 To be manufactured for suitable for the purpose materials.

 To be hermetically sealed - the tubes for the chimney to be with silicone gaskets.

 To be suitable for wok mode under high pressure and temperature 200-250°C

(recommended thickness of the pipes no less than 1mm).

 In case you want to connect the pellet stove to the already existing exhaust gas system

(chimney), its condition must be validated by an authorized installer.

 It is recommended the exhaust gas system (chimney) to be cleaned periodically.

3.5 What tubes must be used for the exhaust gas system (chimney)

The tubes must be solid, smooth inside, mad of steel and must be accompanied by silicone gaskets.

The diameter of tubes long up to 3 m. must be 80 mm.

The diameter of tubes long more than 3 m. must be minimum 100 mm. as it is necessary to obtain

the required draught of the chimney (see 3.3).

The length is calculated as the requirements in 3.1 are kept.

ATTENTION! Do not connect the exhaust gas system to a chimney in which already is connected

another stove, boiler or ventilation system!

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Keine Kommentare

Country Flame HR-01 Bedienerhandbuch Seite 11